Description

GENERAL SPECIFICATIONS

Standard :
Singapore Standard SS245: 2014, MS 1390 : 2010 similar to British Standard BS 7491
Part 3:1994 and BS EN 13280:2001

Materials :
Sheet Moulding Compound (SMC) consists of :
Resin – Isophthalic unsaturated polyester resin conforming to BS 3532 specification
Fiber Glass – Low alkali fibre glass conforming to JIS R3411 to R3417 or BS 3396, BS 3496 and BS 3749 specifications

Manufacturing Process :
Hot pressed SMC compression moulding

Tank Structural Support :
Tie-rod System:
External:
Hot Dipped Galvanised Steel
Internal:
SS304 Tie-rod, Optional SS316
Roof Support : PVC/ABS pipes with GRP roof panel stiffener

External Braced System :
External:
Hot Dipped Galvanished Steel
Internal
None (metal free inside, non-partitioned tank only)
Roof Support: PVC Poles with GRP roof panel stiffener

Sealant :
Non toxic PVC foam/EPDM Rubber

Bolt, Nuts, Washers :
External:
– Standard : Hot Dipped Galvanised Steel
– Optional : SS 304/316

Internal:
– Standard : SS 304 (In-contact with water)
– Optional : SS 316 (In-contact with water)

Roof :
-Standard: Hot Dipped Galvanised Steel
-Optional: SS 304/316

Ladder :
External:
– Standard : Hot Dipped Galvanised Steel, 300mm width

Internal:
– Standard : PVC or Aluminium, 300mm width
– Optional : GRP or SS 304/316, 300mm width

Water Level Indicator :
Standard : Reversed Reading Mechanical Ball Float Type (Cat & Mouse)
Optional : Direct Reading Clear Tube Type

Nozzel Panel :
Pipe nozzles flange not inclusive
Flat panels will be provided on request

*Note: Specification may vary according to client’s requirement.

Reviews

There are no reviews yet.

Be the first to review “GRP Sectional Water Tank”